With the increase of infrastructure facilities in China, more and more industrial operations need to be applied to CNC lathes, of which flat bed hard rail lathes with its outstanding automation performance, excellent stable accuracy and sensitive and diverse functions, the success of the majority of manufacturers. So, do you know what are the five main points to pay attention to when using automated transfer machine? Today, I will give you a detailed introduction.

1, the flat bed hard rail lathe in ensuring that the chassis is stable, the line is connected normally, can be started to work, and then do not rush to feed, first see if the damaged machine is working normally, at this time, can query the damaged machine is not normal, the noise is not too large, the time is not too long, etc. In the case of conditions, it is possible to check whether the current is normal and so on is in line with the motor parameters.

2, the ambient temperature of the flat bed hard rail lathe should be less than 30, and the relative temperature is less than 80%. In general, CNC electronic control boxes are equipped with exhaust fans or chillers to keep the operating temperature of electronic components, especially the central processor, constant or small temperature difference. Excessive temperature and humidity will reduce the life of the control system components, and lead to increased failure, increase in temperature and humidity, and increase in dust will lead to bonding and short circuit of the integrated circuit board.

3. In the case of checking the normal operation of the automated transfer machine, gradually release the material, and check whether the feeding is normal when releasing the material. The steady feeding of the hard rail machine tool is an important factor in choosing the size of the working power. In the case that the machine and the environmental wood are fixed, the stable and continuous feeding can travel the automated transfer machine output value per unit time.

4, the position of the hard rail flat bed CNC lathe should be far away from the vibration source, to avoid the influence of direct sunlight and thermal radiation, to avoid the influence of humidity and airflow. When there is a vibration source around the lathe, an anti-vibration ditch should be set up around the lathe. Otherwise, it will directly affect the machining accuracy and non-disorder of the lathe, and will lead to poor contact and failure of electronic components.

5, before the use of hard rail CNC machine tools, in order to ensure the use of the machine tool and reduce the failure rate of the machine tool, we need to carry out some simple inspection preparations for the machine tool, the specific operations are as follows:

(1) After receiving the automated transfer machine, apply the cotton cloth or silk soaked with cleaning agent to clean off the anti-rust oil or anti-rust paint applied to protect the guide rail surface and processing surface of the lathe at the factory, and apply lubricating oil on the sliding surface and the working surface of the machine according to the product instructions.

(2) Should check whether the automated transfer machine components in accordance with the requirements of the oil, machine tool hydraulic station, automatic lubrication device refueling is in line with the standard, check the coolant in the cooling box is sufficient, and check the electrical control box switches and components are normal, the integrated circuit board is in place.

automated transfer machine https://www.zjshuangzheng.com/Integrated-Transfer-Machine.html