The 400w electrical chain saw is a hand-held power tool that is driven by an electric motor and driven by a transmission mechanism for cutting work heads. 400w electrical chain saw consists of motor, reduction gear box, eccentric shaft linkage mechanism, switch, non-reconnectable plug, cutter and so on. The motor drives the eccentric shaft linkage mechanism through the reduction gear box, so that the tool bar drives the upper tool head reciprocating motion, and the lower tool head is fixed on the tool holder. The power cord is a two-core sheathed flexible cable that forms a non-reconnectable plug with a two-post rubber plug.

The motor drives the eccentric shaft linkage mechanism through the reducer box, so that the tool bar drives the upper tool head as a reciprocating branch, and the lower tool head is fixed on the tool holder. The power cord is a two-core sheathed flexible cable that forms a non-reconnectable plug with a two-post rubber plug.

400w electrical chain saw consists of motor, reduction gear box, eccentric shaft linkage mechanism, switch, non-reconnectable plug, cutter and so on. The motor is a single-phase series motor, placed in a plastic housing. The plastic shell is not only the structural part that supports the motor, but sometimes the stator is also extra insulated, and the additional insulation of the rotor forms a double insulated structure. The motor drives the eccentric shaft linkage mechanism through the reduction gear box, so that the tool bar drives the upper tool head reciprocating motion, cuts the metal plate, and the lower tool head is fixed on the tool holder. The power cord is a two-core sheathed flexible cable that forms a non-reconnectable plug with a two-post rubber plug.

The advantages of 400w electrical chain saw

1. Higher efficiency 400w electrical chain saw is powered by electricity and its pruning efficiency is 2 to 3 times that of traditional hand pruning. In addition, the 400w electrical chain saw can also be used for two-way pruning, making it better for pruning or modeling fruit trees than regular scissors. And in the past, when pruning fruit branches with hand scissors, it was difficult to tolerate prolonged finger and arm pain, while the 400w electrical chain saw did not.

2. Good durability 400w electrical chain saw machine support structure is simple, stable operation, low failure rate, blade cutting ability and high life, in normal use and regular adjustment maintenance can be used for a long time.

3, high pruning quality 400w electrical chain saw stable pruning performance, quality can meet the requirements of horticulture. Under the correct operation, the crown surface smoothness is better than manual trimming, and there is basically no missing cut.

Operation process:

1. First charge the battery for 5 hours (first 12 hours)

2. Before using the tool, unplug the charger and disconnect the tool from the charger (the tool does not work when connected to the charger)

3. Remove the blade jacket

4. Turn on the power manually

5. Before cutting, let the cutting blade run empty for a few seconds, and listen to whether the sound is noisy, too slow or too fast

The above is an introduction to the working principle and advantages of 400w electrical chain saw. I hope it will be helpful to you. If you have product purchase needs, you can contact us directly.

400w electrical chain saw https://www.keylead.cn/Electrical-Chain-Saw-Supply.html